Before & After Photos

A homeowner in Voorhees, NJ called Quality 1st Basement Systems to repair their sinking concrete. They knew if this went without repair, it could cause dangerous tripping hazards. As a solution, we used our PolyLevel Injections which are injected underneath the concrete slabs, raising the concrete to a level position. Since the installation, the homeowner's peace of mind has been restored, and they don't have to worry about tripping hazards!

Homeowner contacted Quality 1st Basement Systems after seeing an Ad for Concrete Lifting and Leveling. Concrete Repair Specialist, Jeffrey Pitek inspected about 4 inches of settlement. The Q1 team was able to lift and level the stairs, permanently stabilizing them using PolyLevel. A small hole is drilled into the concrete steps and PolyLevel was injected underneath to raise the slab back to its original position. Within 15 minutes of job completion, the homeowner was able to use his front steps.  

A homeowner in High Bridge, New Jersey noticed their concrete was sinking and settling, so they contacted Quality 1st Basement Systems. As a solution, we used our PolyLevel Injections which will bring the concrete to a raised position. The entire stairway up to the door was now raised and stabilized. 

Wow! Concrete replacement is a thing of the past when it comes to sinking and settling concrete slabs. Our team raised this sinking slab back towards its original level using PolyLevel. PolyLevel is injected by drilling a small penny-size hole into the concrete. Using a special tool, the Polyurethane foam is injected underneath the slab. The foam expands to fill all voids underneath the soil and begins raising the slab. When leveled, the team will stop injected and immediately the foam will begin to harden, permanently stabilizing the concrete slab. 

Quality 1st Basement Systems was contacted by this homeowner in Sicklerville, New Jersey to inspect their sinking sidewalk. We went to the home, provided our inspection, and suggested using our PolyLevel Injections. This process is done by drilling holes into the concrete slab and the foam is injected into the voids underneath. PolyLevel is a lightweight and environmentally friendly solution that will not add any weight to the existing soil. Our PolyLevel solution will bring the concrete to a raised position and will eliminate any tripping hazards!