Before & After Photos

Our PolyLevel team removed the trip hazards surrounding this pool in Emerson, NJ. First, they drilled small penny-sized holes into the concrete slabs. Next, the polyurethane foam (PolyLevel) was injected through the holes and under the concrete. The polyurethane foam lifted and stabilized the concrete. Once the concrete was stabilized, our team applied NexusPro Joint Sealant to seal the joints. Once the joints were sealed,  the installation was complete. The homeowner was happy with the results and even happier that they did not have to go through the process of concrete replacement. 

A homeowner living in Middletown contacted Quality 1st Basements when they noticed that the concrete slabs surround their pool had settled. System Design Specialist, Tom Carrano, gave an estimate of the homeowner's pool deck and recommended PolyLEVEL to raise the settled concrete. Project Manager, Arturo Jacuinde, and his team injected PolyLEVEL into the concrete slabs, raising them back to level. The homeowner was 100% satisifed with the work done by Quality 1st Basements. 

A sidewalk should provide safety, not dangerous tripping hazards! Quality 1st Basement Systems was contacted by this homeowner in New Milford, New Jersey to inspect their sidewalk that was causing issues. We inspected the area and noticed the concrete was sinking, so we suggested our PolyLevel Injections. PolyLevel is a lightweight and environmentally friendly solution that is injected into the concrete and fills the voids underneath the slab to raise the sidewalk. When the job was complete, the homeowner was happy to see the sidewalk was completely level and raised. Now, the homeowner and neighbors didn't have to worry about tripping hazards!

Quality 1st Basement Systems received a call about sinking slabs outside of an office building in Hoboken, NJ. The slabs created a tripping hazard and with the winter weather approaching, the building manager wanted to get it lifted right away. The installation crew drilled a small hole into each slab, pumping the PolyLevel underneath. The PolyLevel then begins to expand and harden, lifting the slab back to the original level. PolyLevel removed the tripping hazard without having to remove and replace the concrete. 

With help from both our System Design Specialist, Jay and PolyLevel Foreman, Iian, Quality 1st Basements was able to provide a permanent solution to the sinking patio area in Old Tappan, NJ. The homeowner had contacted Quality 1st when they got tired of the puddles forming in the middle of their patio from the settlement. They wanted to avoid replacing the patio area at all cost. 

Iian was able to lift all for sinking slabs back to level, removing the dip in the patio. Now with the patio leveled, water would no longer get trapped in the middle and simply flow towards the grass.